Medical devices6 min read

When can you appoint an external PRRC under the MDR?

Check when the MDR lets you appoint an external PRRC and what to document about qualifications, availability, responsibilities and escalation.

Hendrik StaelsIndustrial pharmacist, founder of MEDCOR
Reviewed by Hendrik

Published Also available inNederlandsFrançais

ShareLinkedInWhatsAppEmail

Can you outsource the role of person responsible for regulatory compliance (PRRC), or must that person work inside your organisation? The answer depends on your role and on the size of your company. Micro and small manufacturers, and authorised representatives, may use an external PRRC who is permanently and continuously available. Medium-sized and large manufacturers need the PRRC within their own organisation.

This article covers medical devices under Regulation (EU) 2017/745 (MDR). The IVDR has a similar provision, which we do not cover here.

What does Article 15 say?

Article 15 of the MDR (opens in a new tab) sets out the role. We used the consolidated text of 9 November 2026; Article 15 has not changed since 2017.

  • Manufacturers have at least one PRRC available within their organisation (paragraph 1).
  • Micro and small enterprises do not need the PRRC within their organisation, but must have that person permanently and continuously at their disposal (paragraph 2).
  • Authorised representatives have at least one PRRC permanently and continuously at their disposal (paragraph 6).

The Medical Device Coordination Group explains how this works in practice in MDCG 2019-7 Rev.1 (opens in a new tab) (December 2023). The guidance is not legally binding, but regulators use it as their reference.

Decision table: can your PRRC be external?

Your situationExternal PRRC?BasisWhat to document
Micro or small manufacturer (fewer than 50 staff and turnover or balance sheet total up to EUR 10 million)YesLaw: Art. 15(2). MDCG: subcontracting to a third party by contractContract naming the person, their qualifications and availability
Medium-sized or large manufacturerNo, the PRRC sits within the organisationLaw: Art. 15(1). MDCG: the PRRC is an employeeEmployment contract, job description, appointment
Group with several legal manufacturersEach legal manufacturer has its own PRRCMDCG, footnote 6Appointment per legal entity
Authorised representative of a non-EU manufacturerYesLaw: Art. 15(6). MDCG: subcontracting by contractContract naming the person, their qualifications and availability
Authorised representative and the non-EU manufacturer it representsNever the same person, even within one groupMDCGNames of both PRRCs
Micro or small manufacturer and its own authorised representativeThe two PRRCs do not come from the same external organisationMDCGOverview of both contracts
Distributor or importer taking on manufacturer obligations (Art. 16(1))Article 15 applies as for a manufacturerMDCGAs above, according to your size
Manufacturer of custom-made devicesRules as above; expertise can also rest on two years of relevant manufacturing experienceLaw: Art. 15(1), last subparagraphEvidence of that experience and the skills gained

The thresholds for micro and small enterprises come from Commission Recommendation 2003/361/EC, as summarised in MDCG 2019-7 Rev.1. Check your status at company level using the rules of that Recommendation.

Where should the PRRC be located?

According to MDCG 2019-7 Rev.1, the PRRC of a manufacturer established in the EU should also be in the EU. The same applies to the external PRRC of an EU micro or small enterprise. The PRRC of an authorised representative should also be located in the EU.

Which qualifications must you be able to show?

Article 15(1) and 15(6) allow two routes:

  • a diploma in law, medicine, pharmacy, engineering or another relevant scientific discipline, plus at least one year of professional experience in regulatory affairs or quality management systems for medical devices;
  • four years of professional experience in regulatory affairs or quality management systems for medical devices.

MDCG 2019-7 Rev.1 adds that the experience should relate to EU requirements and be substantive and recent. Administrative handling of documents, or shadowing a colleague, is not enough. The manufacturer collects the evidence: a CV, copies of diplomas and certificates, and proof of the experience. A competent authority may ask for these during an inspection.

What does “permanently and continuously at their disposal” mean?

The MDCG guidance allows micro and small enterprises, and authorised representatives, to subcontract the PRRC role to a third party. The contract should secure permanent and continuous availability. In practice, the PRRC can carry out the operational duties and react in good time. Availability 24 hours a day is not required. The contract also states the person’s qualifications.

Our advice is to put at least these points in the contract:

  1. the PRRC’s name and a deputy with the same qualifications;
  2. response times, for example for a serious incident;
  3. access to your quality system, technical documentation and vigilance data;
  4. a handover arrangement when the contract ends.

If the PRRC changes, update your actor data in EUDAMED within one week. This follows from Article 31(4) of the MDR and is repeated in the MDCG guidance. Our guide to EUDAMED registration in Belgium explains that registration.

Responsibilities and escalation

Under Article 15(3), the PRRC is at least responsible for ensuring that:

  • device conformity is checked before release;
  • the technical documentation and EU declaration of conformity are drawn up and kept up to date;
  • post-market surveillance obligations are met;
  • the reporting obligations of Articles 87 to 91 are fulfilled;
  • the required statement is issued for investigational devices.

If several people share the role, their areas of responsibility are set out in writing (paragraph 4). The PRRC suffers no disadvantage for doing the job properly, whether or not they are an employee (paragraph 5). The MDCG guidance also asks the manufacturer to involve the PRRC in relevant processes and to share all necessary information, such as identified non-conformities. If the PRRC cannot meet their obligations, they inform the manufacturer.

We also recommend a written escalation route. Decide who the PRRC goes to when there is disagreement about a release or a vigilance report, within what time, and how the decision is recorded.

Hypothetical example: a Belgian start-up with twelve employees places a class IIa device on the market. It may appoint an external PRRC. If the company later becomes a medium-sized enterprise under Recommendation 2003/361/EC, it appoints a PRRC within its own organisation.

Checklist for your PRRC file

  • Assessment of your role and company size, dated.
  • Appointment letter or contract naming the person and their qualifications.
  • CV, diplomas and proof of relevant experience.
  • Written split of responsibilities if there are several PRRCs.
  • Availability and deputy arrangement.
  • Escalation procedure.
  • Up-to-date PRRC details in EUDAMED.

We offer an external PRRC for medical devices under the MDR. If you are unsure whether your current set-up holds, let’s discuss your PRRC coverage.

ShareLinkedInWhatsAppEmail
Hendrik StaelsIndustrial pharmacist, founder of MEDCORHendrik Staels is an industrial pharmacist and the founder of MEDCOR. He holds named roles such as Responsible Person (GDP), Qualified Person (GMP) and PRRC for clients in Belgium and the Benelux.
About Hendrik

Reviewed by Hendrik Staels before publication. Information as at 15 November 2026. Rules and dates can change, so check the cited sources before you act. This guide is general information, not legal advice.

Want to talk it through?

Tell us where you stand and we will say which steps are still open.

Get in touch